PYLE Audio PICDLD82I User Manual

Page 6

DEVICES CONNECTOR

(Male3.5x1.35mm)

(Male2.1x0.6mm)

(Male3.5x1.1mm)

NOKIA a

NOKIA b

E90

N70

N80

N96

6210

6650

8910i

E-11

E-12

OPERATION WITH THE iPod/ iPhone

- TURN ON BOTH THE UNIT AND THE iPod/ iPhone.
- PRESS THE

KEY REPEATEDLY UNTIL THE DISPLAY SHOWS “iPod”

- THE UNIT WILL AUTOMATICALLY START PLAYBACK OF THE SONGS.
- THE iPod

DISPLAY WILL INDICATE THE INFORMATION OF THE CURRENT

SONG (TRACK).

/ iPhone

- AT ANYTIME DURING PLAYBACK, PRESS THE

KEY

TO PAUSE OPERATION OF THE UNIT. PRESS

KEY TO RESUME

OPERATION AT THE SAME TRACK & POSITION.

- AT ANYTIME DURING PLAYBACK, PRESS & HOLD THE

KEY

TO STOP PLAYBACK OF UNIT.

- AT ANYTIME DURING PLAYBACK, PRESS AND RELEASE THE

KEYS TO SKIP FORWARD OR BACKWARDS BY ONE TRACK,

AS DESIRED.

PLAY/PAUSE

- ANY ANYTIME DURING PLAYBACK, PRESS AND HOLD THE

KEYS TO FAST-FORWARD (CUE) OR FAST-REVERSE (REVIEW)

THE SPECIFIC TRACK, WHICH IS CURRENTLY PLAYING.

- YOU CAN OPERATE THE iPod

USING EITHER THE SET, REMOTE CONTROL

OR DIRECTLY WITH THE iPod

ITSELF.

- WHEN THE iPod

HAS BEEN CONNECTED WITH THE UNIT, IT WILL START

CHARGING THE BATTERY OF THE iPod

/ iPhone

- NEVER REMOVE (OR UNPLUG) THE iPod/ iPhone FROM THE SET DURING PLAYBACK,

ALWAYS PRESS & HOLD FOR 2 SECONDS THE

KEY FIRST AND THEN

PRESS THE

KEY TO SWITCH TO ANOTHER SOURCE (EG. “RADIO”

OR “AUX”) BEFORE REMOVING OR UNPLUGGING THE iPod/ iPhone,
TO PREVENT DAMAGE TO YOUR SONG FILES OR MEMORY DEVICES.

FUNCTION

PLAY/PAUSE

FUNCTION

3D-VIRTUAL SURROUND

REPEAT PLAYBACK FUNCTION (iPod/ iPhone)

- AT ANYTIME DURING iPod/ iPhone PLAYBACK:
- PRESS THE FOLLOWING SYMBOLS ON THE iPod/ iPhone SCREEN:

= TO REPEAT THE CURRENT TRACK

= TO REPEAT ALL TRACKS

SHUFFLE (RANDOM) PLAYBACK FUNCTION (iPod)

- THIS UNIT IS ABLE TO SHUFFLE ALL SONGS ON AN iPod/ iPhone AND PLAY THEM

BACK IN "RANDOM" ORDER.

- TO ACTIVATE THIS FUNCTION, SELECT THE SHUFFLE ICON "

" (ON THE iPod/

iPhone).

- THE "

" SYMBOL WILL BE DISPLAYED ON THE iPod

SCREEN &

THE SONGS WILL BE PLAYED IN RANDOM ORDER.

SHUFFLE

/ iPhone

THIS UNIT IS DESIGNED TO ALLOW YOU TO CONNECT AN

WITHOUT THE

NEED FOR DOCK CONNECTORS. THE DESIGN OF THE UNIT HAS BEEN STRUCTURED
TO PROVIDE SUPPORT TO TE CONNECTOR UNDER NORMAL USAGE WITHOUT EXCESSIVE
PRESSURE ON THE

WHEN CONTROLLING PLAYBACK USING THE

SCREEN.

iPod/ iPhone

"Made for iPod," "Made for iPhone," mean that an electronic accessory has
been designed to connect specifically to iPod, iPhone, respectively, and has been certified
by the developer to meet Apple performance standards. Apple is not responsible for the operation
of this device or its compliance with safety and regulatory standards. Please note that the use
of this accessory with iPod, iPhone may affect wireless performance.

MULTI-CHARGING FUNCTION

THIS UNIT IS DESIGNED TO ALLOW YOU TO CONVENIENTLY AND IN A SIMPLE MANNER
CHARGE UPTO 3 DEVICES, WITHOUT THE CLUTTER OF MULTIPLE ADAPTERS RUNNING
TO A WALL OR EXTENSION POWER OUTLET.

SIMPLY DOCK THE IPOD/IPHONE (FOR PLAYBACK OR CHARGING) AND THE UNIT SHALL
AUTOMATICALLY BEGIN CHARGING THE iPod/iPhone.

I) DC JACK - 1
THIS JACK IS DESIGNATED WITH A SPECIAL VOLTAGE REQUIRED TO CHARGE NOKIA
PHONES.
THE SUPPLIED ‘NOKIA a’ & ‘NOKIA b’ WIRES COVER CHARGING FOR MOST OF THE
AVAILABLE NOKIA PHONES.
LIFT THE UNIT TRAY, CONNECT THE TAIL END OF ‘NOKIA a’ OR ‘NOKIA b’ WIRE INTO THE
UNITS DC JACK-1, AND CONNECT THE OTHER ADAPTER END OF THE RESPECTIVE WIRE
INTO YOUR NOKIA ADAPTER SOCKET.
THE UNIT SHALL THEN AUTOMATICALLY BEGIN CHARGING THE NOKIA PHONE.

CHARGING 1: DOCK

CHARGING 2: DC JACKS

BACK/ TUNE -

NEXT/ TUNE +

BACK/ TUNE -

NEXT/ TUNE +