Philips DVR - Manual (Page 18)

14
aI don't know the channelsfor my TV stations
b In this case, press SqP in line 'CHANNEL NUMBER' to start the
automatic channel search. A changing channel number will appear on the
TV screen.
Continue the automatic search until you have found the desired TV
channel.
What isNICAM?
NICAM is a digital sound transmission system. Using NICAM, you can
transmit either 1 stereo channel or 2 separate mono channels. However, if
you experience poor reception resulting in sound disruptions, you can turn off
NICAM.
In line 'NICAM', select 'OFF' using
QSr or SqP .
8
Save the TV channel with OK . 'STORED' will briefly appear on the
TV screen.
9
To search for other TV channels, begin again at step 3 .
0
To end, press MENU .
Using the satellite receiver
TV channels from a satellite receiver (connected to the scart socket EXT.2AV. 2) are
received on the video recorder on programme number '
E2'.
To do this, select programme number ' E1' with 0 on the remote control and then select
programme number ' E2' with P =r .
You should select the TV channels to be received by the satellite receiver directly on the
receiver itself.
Installing your video recording