Parasound Halo C1 Controller - Manual (Page 45)

Connecting a Digital Audio Recorder
To record all your audio sources to a digital recorder you will need both analog and digital
connections between the recorder and the C 1. This is because the Digital Out jacks carry the
signal from the currently selected digital input but not from any analog input, and the analog
record outputs do not carry signals from any digital sources. To make digital recordings from
analog sources, use the analog Record or Rec/Out connections and the recorder’s analog input.
Optical 1 Optical 3
Coax 1
Coax 2
Coax 3
Coax 4 Optical 2 Optical 4
Record
OSD
Zone
NoOSD Main
Digital Out
Optical
Video 1 Video 2 Video 3 Video 4 Video 5 Video 6 Audio 1 Audio 2 Audio 3 Audio 4 Record 1 Record 2 Zone Audio 5
Play/In Rec/Out
OSD No OSD
Front Surround Center
Sub
Back
Balanced Analog Audio Outputs Balanced Analog Audio Inputs
C2 Controller
Parasound Products, Inc.
San Francisco, California, USA
Input 1
Input 2
Input 3
Output
Component Video Inputs and Outputs
Sync Red Green Blue H V
Pr Y Pb
Composite Video Inputs Video Outputs S-Video Inputs
Video 1 Video 2 Video 3 Video 4 Video 5 Video 6
S-Video Outputs
Record Main
Coax Digital Audio Inputs
Made In
Finland
Expansion Port For
Future Technologies
IR Inputs – 12V Triggers – RS-232 Control
External Control
L
R
L
R
Analog Audio Inputs Tape Monitor Analog Audio Outputs Programmable Out Main Analog Audio Outputs 7.1 Analog Audio Inputs
1
0
AC Power
CAUTION
TO PREVENT ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Left Right
Pro 3
Pro 1
Pro 4
Pro 2
Sub
Front Surround Center Back
Main Zone P1 P2 On-Off
Video 1
Video 2
Video 3
Video 4
Video 5
Video 6
Composite
Video Record
Out
Tape
Monitor
Zone &
Record
Outputs
S-Video
Record Out
Digital Audio
Outputs
DIGITAL
AUDIO
RECORDER
Analog
Record/
Input
Analog
Playback/
Output
Digital
Optical
Input
Digital
Optical
Output
L R L R
RCA Plug Toslink Connector
CONNECTING AUDIO AND VIDEO SOURCES AND RECORDERS
continued
45
What You May Need:
• Two pairs of unbalanced interconnects with RCA plugs
• Two digital interconnects, Toslink or coaxial
• Digital audio recorder with digital and analog inputs
and outputs