Polycom DOC2559B - Manual (Page 27)

Polycom RMX 4000 Hardware Guide
1-21
Connecting Cables on the RMX 4000
To connect the cables (AC and DC systems):
•
RTM-IP 4000:
—
Connect the Management Network cable to LAN 2.
— Connect the Signalling cable to LAN 3.
— Connect the Shelf Management cable to LAN 6.
• For each installed RTM LAN - Connect the LAN cable to LAN 2.
• For each installed RTM ISDN:
—
Connect the E1/T1 cables to their PRI Ports.
— Connect the LAN cable to LAN 1.
Figure 1-6 RMX 4000 Rear Panel View with AC Power and Communication
Cables
LAN Connections to RTM LAN
Power Cables
Off/On
switch
E1/T1 Connection to RTM ISDN
Shelf 
Manage-
ment
Management
Network
Signalling
Network
• LAN 4, LAN 5 and the Serial ports are only for debugging and not for
customer use.
• Do not remove the protective plastic caps from LAN 1, LAN 4 and LAN 5
ports.