Philips SJM3151 - Manual (Page 10)

10
RCA Connection
S-Video Connection
3.3 Install
Once you have installed the batteries in the
remote and connected all of the appropriate
cables, you will need to do a quick “pairing” of
the dock with the remote.
D Note
It is recommended to complete the initial set-up,
including the “pairing” sequence before docking
your iPod™ in the docking cradle.
Pairing the dock with the remote for
the first time:
1. Press the
POWER Button on the remote.
2. Position the remote within 1m of the
dock for this duration of this procedure.
3. Follow the easy on-screen set-up wizard
screen prompts.
The easy on-screen set up wizard will guide you
through the different steps on the initial set-up
of your universal remote for iPod™.
Initial set-up of your universal remote for
iPod™:
1. Select the language for your instructions
on the remote using the cursor keys.
Press
OK .
While pairing the remote to the docking cradle,
position the remote within 1m of the dock for
the duration of the procedure.
D Note
While your iPod™ is docked in the cradle, your
iPod™ screen will show the message below.
This is normal operation.
2. Select “Next” and press OK .
3. Confirm if you want to add other devices,
like your TV or DVD player, by selecting
“Yes”. Press
OK . This replaces the devices’
original remote controls with the universal
remote for iPod™.
Getting Started
SJM315Final.indb 10 8/14/07 4:10:28 PM