Panasonic KX-TG1840NZ - Manual (Page 49)

Multi-unit Operation
49
L The base unit will ring.
2 Base unit:
Press {s} to answer.
3 Handset:
When finished talking, press {ih}.
Base unit:
When finished talking, press {s}.
When the base unit calls a handset
1 Base unit:
Press {x} and the desired handset
number.
L The handset will ring.
L To page all handsets, press {x} and
{0}. You can talk with the handset
user who answers first. (Paging)
L To stop paging, press {x} again.
2 Handset:
Press {C} or {s} to answer.
3 Base unit:
When finished talking, press {s}.
Handset:
When finished talking, press {ih}.
Between handsets
Example: When handset 1 calls handset 2
1 Handset 1:
Press {INT} and {2} (desired handset
number).
L The handset 2 will ring.
2 Handset 2:
Press {C} or {s} to answer.
3 When finished talking, press {ih}.
Transferring calls,
conference calls
Outside calls can be transferred to the base
unit or to a handset in the same radio cell. 2
people in the same radio cell can have a
conference call with an outside party.
From a handset to the base unit
When a handset transfers a call to the
base unit
1 Handset:
During an outside call, press {INT} and
{0} to page the base unit.
L The outside call will be put on hold.
L If there is no answer, press {INT} to
return to the outside call.
2 Base unit:
Press {s} to answer the page.
L The base unit user can talk with a
handset user.
3 Handset:
To complete the call transfer, press
{ih}.
To establish a conference call, press
{3}.
Transferring a call without speaking to
the base unit user
1 During an outside call, press {INT} and
{0} to page the base unit.
L k flashes on the handset display to
indicate the outside call is on hold.
2 Press {ih}.
L The outside call rings at the base unit.
Note:
L If the base unit user does not answer the
call within 1 minute, the call will ring at
your handset again.
From the base unit to a handset
When the base unit transfers a call to a
handset
1 Base unit:
During an outside call, press {x} and
the desired handset number to page the
handset.