beautypg.com

Panasonic KX-TG1840NZ User Manual

Page 40

background image

Answering System Features

40

Listening to new/all messages

When you have new messages:

– the answer on indicator on the base unit

flashes

– the total number of new messages is

shown on the handset display

– the base unit beeps about once a minute if

the message alert feature (page 44) has
been turned on

Note:
L The base unit display will show the total

number of recorded messages.

Using the base unit
Press {

5}.

L If new messages have been recorded, the

base unit plays back new messages.

L If there are no new messages, the base

unit plays back all messages.

Note:
L To adjust the speaker volume during

playback, press {

>} or {<} repeatedly. 9

volume levels are available.

L After playing back all of the new

messages, the answer on indicator will
stop flashing but will remain lit up when
the answering system is turned on.

Using the handset

1

Press {j/OK}.

2

Select “Answer System”, then press
{>}.

3

Select “Play New Msg.” or “Play
All Msg.

, then press {>}.

Note:
L To adjust the speaker volume during

playback, press {e} or {v} repeatedly.

L While listening to messages, you can

switch between the receiver and speaker
by pressing {C} or {s}.

Repeating, skipping, stopping,
erasing a message during
playback

L To repeat a message during playback:

– for the base unit, press {

<}

– for the handset, press {<}

If pressed within the first 5 seconds of a
message, the previous message will be
played.

L To skip a message during playback:

– for the base unit, press {

>}

– for the handset, press {>}

L To stop a message during playback:

– for the base unit, press {

5}

– for the handset, press {9}

L To erase a message during playback:

– for the base unit, press {

4}

– for the handset, press {*}, {4}

Erasing all messages

Using the base unit
Press {

4} 2 times.

Note:
L The greeting message is not erased.

Using the handset

1

Press {j/OK}.

2

Select “Answer System”, then press
{>}.

3

Select “Erase Message”, then press
{>}.

4

Select “Erase All”, then press {>}.

5

Select “Yes”, then press {>}.

6

Press {ih}.

Note:
L The greeting message is not erased.