Philips BDP5010 - Manual (Page 48)

48
LIST OF SETTINGS
EN
Category Menus/Options Description
Advan
ced Setu
p
Audio Analog Audio
• When HDMI cable is
connected, make
sure “HDMI Audio”
setting is set to “Off”
to change the
“Analog Audio”
setting.
Speaker Setup
• Refer to page 56
for more
information.
Front (L/R) Large/Small Sets the speaker configuration to
match the size / number of your
speakers.
• You can also output the test tone
from each speaker by pressing
[RED].
Center Large/Small/Off
Surround (L/R) Large/Small/Off
Surround Back
(L/R) Large/Small/Off
Subwoofer On/Off
Speaker Distance Unit Feet Sets the desired measure system.
This measure system will be used for
“Speaker Distance” setting.
Meters
Front (L/R) 0-60 ft default
is 10 ft Select the distance from the listening
point to the speaker to get the ideal
delay time.
Center 5-10 ft default
is 10 ft
Surround 0-10 ft default
is 10 ft
Surround Back 0-10 ft default
is 10 ft
Default Yes/No default
is “No”
Speaker Level Front (L)
0-12 dB
default
is 0 dB
Sets the volume level for each
speaker to get the ideal audio
balance.
Center
Front (R)
Subwoofer
Surround (R)
Surround (L)
Surround Back
(R)
Surround Back
(L)
Ratings Lock
• Refer to
page 56 for
more
information.
Rating Level All Sets the rating level for the disc
playback.
8 [Adult]
to
1 [Kid Safe]
New PIN Sets the new password for the
“Ratings Lock” setting.