Planet Technology Network Device WAP-5100 - Manual (Page 16)

- 12 -
3.3.1.2 Preference
You can set the parameters for the Kick Start as desired. Open the Start menu and select
Preference, a dialog box will appear as below. After completing desired modifications, click OK to
close the dialog box and apply the changes to Kick Start.
3.3.1.3 New
If the MAC address of the device is already known, you can use this function to connect it directly.
Open the Edit menu and select New, or click on the icon , a dialog box will pop up. Enter the
MAC address of the device and click OK to make the connection.
3.3.1.4 Delete
If you want to remove a specific device from the list, select its MAC address, open the Edit menu
and select Delete, or click on the icon . The device will disappear from the list immediately.
3.3.1.5 Delete All
It is the similar function as Delete. Open the Edit menu and select Delete All, or click on the icon
, all devices will be removed from the list immediately.
3.3.1.6 Ping Test
You can use this function to test the IP connectivity between the administrative PC and a specific
device. Select the MAC address of the device you want to test from the list, open the Tools menu
and select Ping Test, or click on the icon , the test will be executed right away. A dialog box will
pop up to inform you whether the test passes or not. If the test fails, please make sure your
administrative PC and the device are in the same IP segment.