Philips 9850 User Manual

Page 11

Digital Telephone Desktop 9850

Menu entries
The device comes with a menu which provides the following menu entries for making general
settings:

• Setting the date and time:

Setting the voice prompt language: E/FR/D/ES – select between English, French, German or
Spanish voice prompt language.

Note: ”Private” is an option which can be used for an additional

language. The corresponding wave-prompts must be added on the memory card [File format:
WAV,16bit,12kHz,mono].

• Setting Overwrite or Insert mode: - the default setting is overwrite mode.

• Setting the recording format:

(Standard Play or Long Play mobile)

• Enabling and disabling the device beep:

• Microphone sensitivity:

- will be automatic in remote telephone recording mode

• Voice Activation on/off:

- during telphone operation this function will be turned off.

• Backlight on/off:

• Changing the contrast:

• Displaying the recording time:

(remaining recording time) or

(used-up recording

time)

• Reformatting the memory card:

Attention: This will also delete all voice prompts!

• Voice reminder “please press any key” if no keys are pressed and no

voice level was detected during pause (stop) mode. Adjustable between 1
/ 5 / 10 / 30 minutes, The default setting is 5 minutes:

• Busy Detection Level: 1 = most easy detection, quick disconnect after very

short busy sequence, may also hang up when whistling 2 = easy detection
of hangup signal, for short busy sequence 3 and 4= are long busy signal
necessary, most selective between voice and busy tone. The default
setting is 2:

• Configure the number of ring tones before the device picks-up. The default

setting is 2 ring tones before the device picks up the call:

• Select the menu entry for exiting the menu and confirm the selection by pressing the Jog Dial: