Primera Technology 6 - Manual (Page 7)

Getting Started 3
This illustration shows the input ports found on the rear panel
of the printer. Note that the printer’s auxiliary port is for use
with auto loaders and automatic duplicators only, which are
sold separately. For more information on the interface ports ,
please refer to Appendix B.
D. APPLYING POWER
1. Locate the power adapter supplied with your printer.
2. Place one end of the adapter cord into the power port on
the rear panel of the printer.
3. Plug the power cord of the adapter into an available wall
outlet. Once the power cord is connected, the printer will
automatically turn ON.
Power Port
Auxiliary Port
USB Port
510901.qxd 5/26/2004 11:20 AM Page 3
TOC INDEX