Primera Technology 6 - Manual (Page 21)

Using the CD/DVD Printer 6 with Windows 17
The Cartridge Alignment button will perform a test print to
calibrate CMY cartridge to the Kmc photo cartridge as well as
the printing and also the color-to-black offset values. Place a
CD in the disc tray before clicking on this button. Your print
should look something like this:
After the test print is completed, examine the lines displayed
after A,B,C and D. Each of the lines will have a number
associated with it. Enter the number for the straightest line for
for A,B,C and D in the space provided in the software.
Centering the Print Image contains options to allow you to
make sure images are aligned properly on the media.
NOTE: Your printer comes from the factory pre-calibrated to print the image
in the center of the CD. You can use this adjustment if you need to
fine-tune this location.
If you ever wish to verify your factory-calibrated Vertical and
Horizontal calibration settings, you can run a simple
calibration procedure to assure that your images will be
centered when printed on a CD. To do this, refer to the
following steps:
1. Verify that a disc and a color ink cartridge are installed in
the printer. It is important to use the same disc you
normally use for your publishing because different brands
of discs may vary slightly in size. Also, verify that the
printer is powered ON and that it is connected to your
computer.
0 4 8 12
13
14
15
10
11
9 5 1
6
7 3
2
14 12 10 8 6 4 2 0
10 12 14 16 18
10 12 14 16 18 0 2 4 6 8
0 2 4 6 8
A
B
C
D
510901.qxd 5/26/2004 11:21 AM Page 17
TOC INDEX