Primera Technology 6 - Manual (Page 33)

Interfacing Information 29
B. 6-PIN MINICIRCULAR AUXILIARY INTERFACE
The 6-pin minicircular auxiliary interface is used for connecting
the printer with auxiliary equipment such as a CD transporter/
auto-loader.
Pin assignments are as follows:
Uses 5v logic @ 5mA
Pin Number Signal Description
1 Busy - Output is high when the printer is busy
or moving the Disc Tray.
2 Tray Out - Output is high when the Disc Tray
is fully ejected.
3 Tray In - Output is high when the Disc Tray is
fully inserted.
4 CD In - Output is high when the Disc Tray is
in and a CD is present.
5 Ground.
6 Tray In/Out - A low input moves the Disc
Tray in if it is out, and out if it is in.
TABLE A-1: Auxiliary Interface Pin Assignments
NOTE: Pins 1-4 are low if the printer is plugged in but the power has been
turned off using the printer’s Power Button
5 6
4 3
2 1
510901.qxd 5/26/2004 11:21 AM Page 29
TOC INDEX