beautypg.com

Paradyne 12-Port VoSHDSL Access Multiplexer SAM2000QV-12 User Manual

Page 8

background image

6.1.2 Local Files

Management and interface module configurations can be saved on your PC, or local network,
as a backup and/or for use as a template for future configurations, via the MUM in your IP
DSLAM. Management configurations and all interface module port configurations are saved

concurrently; SAM2000GV configurations cannot be saved independently. Once your IP DSLAM
has been configured as desired (including the SAM2000GV), settings can be flash uploaded
(to a local file) through a Trivial File Transfer Protocol (TFTP) tool with a GET command and the
following information:


6.1.2.1 Backup

An IP DSLAM backup file records ALL management and port configurations.

6.1.2.2 Template

An IP DSLAM template file records all management and port configurations EXCEPT the
MUM's IP Address.


Configuration files can also be flash downloaded FROM a local file TO an IP DSLAM, simply
replace the GET command with a PUT command. Refer to your TFTP user manual for further

instruction.

6.2 LED Indications

ITEM

DATA NEEDED FOR BACKUP

EXAMPLE

Host Name

DSLAM_IP Address (xxx.xxx.xxx.xxx)

193.166.254.98

Remote Filename NVR_BACKUP.BIN.[superuser password] nvr_backup.bin.Password

Local Filename

user preference

dslam27_mum13_backup.bin

ITEM

DATA NEEDED FOR BACKUP

EXAMPLE

Host Name

DSLAM_IP Address (xxx.xxx.xxx.xxx) 193.166.254.98

Remote Filename NVR_CFG.BIN.[superuser password]

nvr_cfg.bin.Password

Local Filename

user preference

n2n_dslam12000_template.bin


LED

State

Indication

Additional Information

Power (PWR)

solid green

SAM2000GV is
operational

If the Power LED is not illuminated, it is unlikely that the
SAM2000GV-12 is receiving power, in which case none of
the LEDs will be illuminated.

SHDSL Link (Lk)

pulsing
green

SHDSL connection is
established and active

The SHDSL link is operational and traffic is flowing.

solid green

problematic SHDSL
connection

A connection exists but there is indication of a problem
with the SHDSL line.

no
illumination

no SHDSL connection

210-0000045 rev04