Polaris Sportsman 9922172 - Manual (Page 112)

110
MAINTENANCE
Recoil Housing (if equipped)
Always drain the recoil housing
after operating the vehicle in wet
conditions. Drain the housing before
storing the vehicle. Make sure the
housing is completely dry before
reinstalling the drain plug.
1. Place the transmission in PARK.
2. Stop the engine.
3. Remove the drain screw on the
bottom of the recoil housing.
4. Allow the housing to drain com-
pletely.
5. Reinstall the drain screw.
NOTE: Do not open the crankcase drain
unless the engine has ingested
water. On 4-cycle engines, some
engine oil will be lost if the crank-
case drain is opened.
Recoil Housing