Philips AQ95-56F-1224KR - Manual (Page 35)

35
Remote access commands
Key Function
1 Repeat the current or listen to
the previous message.
2 Listen to messages.
3 Skip to the next message.
6 Delete the current message.
7 Switch the answering machine
on.
(not available when you listen to
the messages).
8 Stop listening to the message.
9 Switch the answering machine
off.
(not available when you listen to
the messages).
Activate/deactivate the remote access
You can allow or block remote access to the
answering machine.
1
Press MENU.
2
Select [ANSWER MACHINE] >
[SETTINGS] > [REMOTE ACCESS],
then press [OK] to confirm.
3
Select a new setting, then press [OK] to
confirm.
The setting is saved. »
Access the answering machine
remotely
1
Make a call to your home number with a
touch tone phone.
2
Enter # when you hear the
announcement.
3
Enter your PIN code.
You now have access to your »
answering machine, and you can now
listen to the new messages.
Note
You have 2 chances to enter the correct PIN •
code before your phone hangs up.
4
Press a key to carry out a function. See
the Remote access commands table
below for a list of available functions.
Note
When there is no message, the phone hangs •
up automatically if no key is pressed for 8
seconds.
English
EN
IFU_CD270-275_05_EN.indd 35 1/5/2010 5:33:02 PM