Philips DCR 9001/02 - Manual (Page 18)

66
EN
7.1.2 Your TV set is only SDTV capable
Incorporate your receiver in your existing installation as described below.
- Connect the cable from the cable wall socket to the “RF IN” socket of your digital receiver.
- Connect the “EXT1” SCART socket of your digital receiver to the RGB capable SCART socket of your TV using the SCART lead
supplied with your digital receiver.
- Connect the “EXT2” SCART socket of your digital receiver to the “EXT1/OUTPUT” SCART socket of your recorder using a
SCART lead.
- Plug all your equipment, excluding your digital receiver, into the mains.
This connection applies to both VCRs and DVD recorders fitted with one or two SCART sockets.With this connection set
up, you can:
• watch digital TV while you record analogue TV.
• watch analogue TV while you record digital TV.
• record the digital TV channel you are watching.
• watch play-back from your VCR or DVD.
Cable Receiver
RF coaxial cable
Cable Wall socket
EXT 1 EXT 2
TV set
Recorder
EXT 2
EXT 1 ANT IN
ANT OUT