Panasonic TH-LB30NT - Manual (Page 55)

55
Network/Security setting of the projector
(cont.)
Additionally perform the following setting using the [AUTHENTICATION] setting.
When setting [OPEN] or [SHARED] as authentication and setting [WEP ※ ] as the encryption method:
DEFAULT KEY : Set 1 – 4 numerals for the default key.
KEY 1 – 4 : Set these to match the WEP key registered in [DEFAULT KEY] and select [OK].
Either the 64-bit or 128-bit WEP key can be set. For the 64-bit key, input five alphanumerics (or a 10-digit
string for the hexadecimal format) for the 128-bit key, input 13 alphanumerics (or a 26-digit string for the
hexadecimal format).
When using [WPA-PSK ※ ] or [WPA2-PSK ※ ] : Set key and select [OK].
Input either 8 to 63 alphanumerics or a 64 digit string in the hexadecimal format.
Important video/audio data is protected because AES ※ encryption processing takes place in advance for all network numbers,
even if [ENCRYPTION] is set to [NONE].
※ “Glossary” (See page 71)
The following settings as [USER1] - [USER3] in the wireless LAN are set before the projector leaves the factory.
SSID : Panasonic Projector
DHCP : OFF
IP ADDRESS : 192.168.11.100
SUBNETMASK : 255.255.255.0
DEFAULT GATEWAY : 192.168.11.1
MODE
: AD HOC
AUTHENTICATION : OPEN
ENCRYPTION
: NONE
CHANNEL : 11
Default settings of [USER1] - [USER3]
WIRELESS DETAILED SETUP
OK CANCEL RETURN
RETURN
SELECT
KEY1
KEY2
KEY3
KEY4
DEFAULT KEY 1
3/3 USER1