Panasonic DMC-LZ8 - Manual (Page 28)

28
VQT1L86
Basic
Recording conditions
Dusk/Sunrise glow/Low-light intensity/Jitter
(example)
The camera cannot detect the face since
the face occupied in the screen is too big.
In any case, the camera makes the
best setting. To take pictures in some
specifi c scene, using the recording mode
matching your purpose is recommended.
(example)
When [ ] (i PORTRAIT) changes to [ ]
ˆ [PORTRAIT] mode ( P52 )
When [ ] (i SCENERY) changes to [ ]
ˆ [SCENERY] mode ( P53 )
When [ ] (i MACRO) changes to [ ]
ˆ Macro shooting ( P46 )
When the fl ash is set to AUTO [ ],
[i NIGHT SCENERY] cannot be used.
When the fl ash is set to Forced FLASH
OFF [ ], [i NIGHT PORTRAIT] cannot
be used.
Intelligent ISO
The camera automatically sets the adequate
ISO sensitivity and shutter speed according
to the action and brightness of the subject.
Face detection
The camera automatically detects the
person’s face. The focus and exposure
can then be adjusted to fi t that face.
(maximum: 15)
Quick AF
Focusing will be faster when the shutter
button is pressed as the camera
automatically adjusts the focus when there
is not much jittering.
Stabilizer
The camera automatically detects and
compensates for jittering.
–
•
•
•
•
•
You can automatically display pictures
vertically if they were recorded holding
the camera vertically
( P32 , 94 ) .
When you press the shutter button, the
screen may become bright or dark for
a moment. This function allows easy
adjustment of focus and the recorded
picture will not be affected.
Be careful not to move the camera when
you press the shutter button.
Do not cover the photo fl ash or the AF
assist lamp with your fi nger or other
objects.
Do not touch the lens.
In [i NIGHT SCENERY] the shutter
speed becomes 8 seconds only when the
camera has determined that there is little
jitter such as when using a tripod. Do not
move the camera while taking pictures.
You cannot use the following functions.
Exposure compensation
Auto bracket
White balance fi ne adjustment
Digital zoom
Flash ( P43 )
You can select the setting of fl ash AUTO
[
] or Forced OFF [ ].
When AUTO is selected, depending on the
type of subject or brightness, fl ash is set to
i AUTO [
], i AUTO/Red-eye reduction
[ ], or i Slow sync./Red-eye reduction
[ ].
In [ ] or [ ] fl ash mode, fl ash
emitted twice.
•
•
•
•
•
•
•
–
–
–
–
■
•