Polaroid P100i - Manual (Page 44)

36
A2 • Check that the ribbon is properly rolled onto the ribbon cores.
A3 • Push down on the Print Head Lock Lever until an audible
“click” signals the locked-down position.
A4 • Ribbon will automatically synchronize.
A5 • Print again.
B1 • Open cover and press down the Print Head Unlock Lever to
open the Print Head carriage. The Print Head will move up.
B2 • Push down on the Print Head Unlock Lever until an audible
“click” signals the locked-down position.
B3 • Ribbon will automatically synchronize.
B4 • Print again.
C1 • Use a different supply of cards.
D1 • Perform a cleaning of the Print Head (See 4•2 Cleaning the
Print Head).
D2 • Replace Cleaning Roller (See 4•3 Cleaning Cartridge).
• No printing on the card.
Possible Cause
A • Ribbon may not be installed in the printer.
B • Cards may not meet specifications.
C • Cable on Print Head may be
disconnected.
D • Print Head elements may be scratched or
burnt.
>> Solution
A1 • Check for ribbon in the printer.
B1 • Use a different supply of cards.
C1 • Power off the printer and check the Print Head cable
connections.
P100i
User’s Manual
General Information
Getting Started
Operation
Printing a Card
Cleaning
Troubleshooting
Specifications
Appendix A
Appendix B
Appendix C
Polaroid
For optimum print quality, always keep cover of
the printer closed except during ribbon loading
and card thickness control procedures.
The card flipper will not operate and an error will
be indicated if you try to flip a card with the cover
open.