Polaroid P100i - Manual (Page 43)

35
A4 • Ribbon will automatically synchronize.
A5 • Print again.
B1 • Perform a Cleaning of the Print Head (see 4•2 Cleaning the
Print Head).
C1 • Call service for Print Head replacement information.
• Printing shows very pale or inconsistent results.
Possible Cause
A • Ribbon may have been stored improperly
or is damaged.
B • Cards may not meet specifications.
C • Contrast and/or intensity may be set to
values which are too high.
D • Dust or embedded contamination on
elements of the Print Head.
>> Solution
A1 • Change ribbon and print again.
B1 • Use a different supply of cards.
C1 • Adjust Contrast and/or Intensity values in software.
D1 • Perform a Cleaning of the Print Head (see 4•2 Cleaning the
Print Head).
• Printing shows blurry printed image.
Possible Cause
A • Ribbon may not be correctly positioned.
B • Ribbon may not synchronized on the
correct color panel position.
C • Cards may not meet specifications.
D • Dust inside the printer and/or dirty
Cleaning Roller.
>> Solution
A1 • Open cover and press down the Print Head Unlock Lever to
open the Print Head carriage. The Print Head will move up.
P100i
User’s Manual
General Information
Getting Started
Operation
Printing a Card
Cleaning
Troubleshooting
Specifications
Appendix A
Appendix B
Appendix C
Polaroid