Paradyne 8785 - Manual (Page 11)

11
Configuration Edit/Display
The Configuration Edit/Display screen is displayed when the current, customer, or
default configuration is loaded and allows groups of configuration options to be
displayed. To access the Configuration Edit/Display screen, follow this menu selection
sequence:
Main Menu
→
Configuration
→
Current Configuration
– or –
Main Menu
→
Configuration
→
Default Factory Configuration
О
О
ОО
ОО
main/config/edit Hotwire
Slot: 4 Model: 87x5
CONFIGURATION EDIT/DISPLAY
Network
SYNC Port
Copy Ports
System Options
Management and Communication
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions, ESC for previous menu MainMenu Exit
Save
Select . . . To Access the . . . To Configure the . . .
Network Network Interface Options DSL network interface
Ports 1– 4.
SYNC Port Synchronous Data Port Options Synchronous DTE interface,
Ports 1– 4.
Copy Ports Copy Ports Options DSL network and
synchronous DTE interface
ports by copying options
from port to port.
System Options System Options General system options of
the unit.
Management
and
Communication H Telnet Session Options
H General SNMP Management
Options
H SNMP NMS Security Options
H SNMP Traps Options
Management support of the
unit through SNMP and
Telnet.
NOTE: The SNMP NMS
Security Options screen is
not available in
IP Conservative mode.