Planet Technology ICA-100 - Manual (Page 22)

PC Configuration
19
Figure 3-7: Trigger Screen
The default setting for the I/O Trigger functions are disabled. You must enable the I/O
Trigger first before the Triggers will perform. There are two options to select from the
Trigger screen I/O Input 1 Trigger and I/O Input 2 Trigger.
I/O Input 1 Trigger:
Select “Send e-mail attached with image” and enter the relevant information such
as the SMTP Server Address, Sender e-mail Address, Receiver e-mail Address,
Sending Interval and Sending Times.
SMTP Server Address
SMTP(Simple Mail Transfer Protocol) is a protocol for sending e-mail messages
between servers. The mail server address must be filled in this field. If the SMTP
server needs authentication, ICA-100 series will use Admin ID and Admin Pass-
word entered in System page as login account and password.
Sender e-mail Address
The e-mail address of who will be sending the e-mail.
Receiver e-mail
The e-mail address of the person whom will receive the e-mail.
Sending Interval