Planet Technology ICA-100 - Manual (Page 66)

63
Appendix C
I/O Connectors
An 8-pole connector is provided for auxiliary I/O connections to ICA-100 series. The
I/O connector provides the physical interface for 2 digital outputs and 2 digital inputs
that is used for connecting a diversity of external alarm devices to ICA-100 series such
as IR-Sensor and alarm relay. The digital input is used for connecting external alarm
devices. Once triggered, images will be taken and e-mailed. The supported transistor
output can give a maximum of DC 5V to the externally connected alarm devices. Once
triggered, the current will activate the devices.
In 1
In 2
In 1 & In 2 is a pair for digital input. It works at voltage 5V
In 3
In 4
In 3 & In 4 is a pair for digital input. It works at voltage 5V
Out 5 -
Out 6 +
Out 5 - & Out 6 + is a pair for digital out. The out put voltage is 5 V and
maximum current is 100 mA
Out 7 –
Out 8 +
Out 7 - & Out 8 + is a pair for digital out. The out put voltage is 5 V and
maximum current is 100 mA
C