Trigger – Planet Technology ICA-100 User Manual
Page 21
Broadband Router User Guide
18
Note: Please find below NTP server web address for your reference to set the time
server.
Protocol:
Two options of NTP or Time are available for your selection to link with the Time
Server. The default setting is NTP.
TimeZone:
System administrator must select the time zone for the region. Please refer to the
appendix for the time zone selection table.
To set the Date Time manually select
“Set Manually” and system administrator must
enter the Date and Time in the respective field manually.
Note: When you select Set Manually, each time ICA-100 series is powered off and
on you must re-enter the details once again due to time lost.
Save/Cancel:
After making sure all settings in the DateTime are correct, click on the
“Save” icon to
store the settings for ICA-100 series. You can alternatively click on the
“Cancel” icon
to restore all settings to the values last saved to or retrieved from ICA-100 series.
Trigger
The Trigger menu contains commands for the I/O Trigger connectors providing the
physical interface for 2 digital output and 2 digital input that is used for connecting a
diversity of external alarm devices to ICA-100 series such as IR-Sensor and alarm
relay. Click on
“Trigger” in the system administration menu bar and the Trigger
screen will appear as illustrated below: