Data format settings – PSC PowerScan User Manual
Page 28
22
PowerScan
™
Scanner
Data Format
Settings
The bar codes on this page can be used to select the data format config-
uration needed to communicate with your system. Refer to Table 1,
RS-232 Data Format below for acceptable combinations of these setting.
Data Format
Table
There are many possible data format configurations for an RS-232
interface. Check your host system manual to find out your system’s
communications requirements.
Table 1. RS-232 Data Format
Use these bar codes to set the Data Format options desired.
Data Bit
Parity Bit
Stop Bit(s)
Start Bit
Seven
0
2
1
Seven
1
1
1
Seven
1
2
1
Eight
0
0
1
Eight
0
2
1
Eight
1
1
1
SET -------------------------------------------
Data Bit
Seven
---------
Eight
---------