PSC PowerScan - Manual (Page 10)

4 PowerScan ™ Scanner
Software Verify that your scanner supports the desired interface
1
. The list below
indicates the interface groupings the scanner supports. Contact your
nearest PSC service depot if you don’t know your scanner’s group, or
need assistance to change the scanner to another interface group.
The Standard Keyboard Wedge/Wand Emulation/RS-232 Group
supports:
• I/F Type A - PC/XT w/Alternate Key Encoding
• I/F Type B - AT, PS/2 25-286, 30-286, 50, 50Z, 60, 70, 80, 90 & 95
w/Alternate Key Encoding
• I/F Type C - PS/2 25 and 30 w/Alternate Key Encoding
• I/F Type D - PC/XT w/Standard Key Encoding
• I/F Type E - AT, PS/2 25-286, 30-286, 50, 50Z, 60, 70, 80, 90 & 95
w/Standard Key Encoding
• I/F Type F - PS/2 25 and 30 w/Standard Key Encoding
• I/F Type H - IBM
®
3xxx w/102 keyboard
• I/F Type I - PS/555530T w/104 keyboard
• I/F Type J - NEC
®
9801 keyboard
• Wand Emulation
• RS-232
• WN
2
-RS-232 (SNI)
The IBM/RS-232 Group supports:
For interface groupings supported by the Universal [Keyboard] Wedge
Group:
• Consult the Universal Wedge Programming Guide for more infor-
mation.
1. Contact your dealer or sales representative if your desired interface is not listed. Interface group
definitions are subject to change without notice.
2. Wincor Nixdorf
®
(formally SNI)
• IBM Port 5B • IBM Port E
• IBM Port 9B • RS-232
• IBM Port 17 • WN-RS-232