Adjusting 3-band parametric equalizer, Available accessories – Pioneer AVH-P4900D User Manual

Page 66

Display

Equalizer curve

CUSTOM1

Custom 1

CUSTOM2

Custom 2

SUPER BASS

Super bass

! CUSTOM1 and CUSTOM2 are adjusted

equalizer curves.

! When FLAT is selected no supplement or

correction is made to the sound. This is
useful to check the effect of the equalizer
curves by switching alternatively between
FLAT and a set equalizer curve.

Press EQ and hold to switch to equali-

zer function.
Press

EQ and hold until an equalizer curve

name appears in the display.

# To switch to SFC function, press EQ and hold
again.

Press EQ to select the equalizer.

Press

EQ repeatedly to switch between the fol-

lowing equalizers:
POWERFUL

—NATURAL—VOCAL—FLAT—

CUSTOM1

—CUSTOM2—SUPER BASS

Adjusting 3-band parametric equalizer

For

CUSTOM1 and CUSTOM2 equalizer

curves, you can adjust the front, rear and cen-
ter equalizer curves separately by selecting a
center frequency, an equalizer level and a Q
factor for each band.

! A separate CUSTOM1 curve can be cre-

ated for each source.

! A CUSTOM2 curve can be created com-

mon to all sources.

! The center speaker largely determines the

sound image and getting the balance right
isn

’t easy. We recommend reproducing a 2-

ch. audio (a CD for example) and getting
the balance right among the speakers ex-
cept for the center, and then reproducing a
5.1-ch. audio (Dolby Digital or DTS) and ad-

justing the center speaker output to the
balance you have already got among the
other speakers.

Touch NEXT twice on the DSP function

menu.

Touch PARA EQ.

Touch a or b to select the desired item.

Each time you touch a or b selects the item
in the following order:
SP-SEL (speakers)

—BAND (bands)—

FREQUENCY (center frequency)

—LEVEL

(equalizer level)

—Q. FACTOR (Q factor)

Touch c or d to select the speaker to

be adjusted.
Touch c or d until the desired speaker ap-
pears in the display.
REAR (rear speakers)

—CENTER (center speak-

er)

—FRONT (front speakers)

# You cannot select speakers whose size is set
at

OFF.

Touch b and then touch c or d to se-

lect the equalizer band to be adjusted.
Each time you touch c or d selects equalizer
bands in the following order:
LOW (low)

—MID (mid)—HIGH (high)

Touch b and then touch c or d to se-

lect the center frequency of selected band.
Touch c or d until the desired frequency ap-
pears in the display.
40Hz

—50Hz—63Hz—80Hz—100Hz—125Hz

—160Hz—200Hz—250Hz—315Hz—400Hz—
500Hz

—630Hz—800Hz—1kHz—1.25kHz—

1.6kHz

—2kHz—2.5kHz—3.15kHz—4kHz—

5kHz

—6.3kHz—8kHz—10kHz—12.5kHz

Available accessories

Section