Panasonic KX-FPC141 - Manual (Page 23)

Setup (Main Unit)
Initial
Preparation
23
Paper tray
Paper stacker (not included)
Insert the two tabs on the paper tray into the slots on the
back of the unit.
● Do not place the unit in areas where the paper tray
may be obstructed by a wall, etc.
Tabs
Slots
Paper tray
1 Remove the shipping tape from the paper stacker.
2 Lift the front of the unit and hold the aluminum
sheet up to prevent it being bent by the paper
stacker while inserting the paper stacker into the
side slots.
Paper stacker Shipping tape
Side slots
Bottom
Aluminum sheet
3 Confirm that the paper stacker is locked into the
center slots and slide back.
Center slots
Paper
stacker
To stack printed paper, a paper stacker is available as an accessory. To order, see page 18.
4 Slide the paper stacker forward until it stops.
Paper stacker