Pantech G670 - Manual (Page 23)

22
QUICK START QUICK START
Installing the Battery
As shown in the picture below, fix the part (where the metal groove
of the battery is located) into the groove at the bottom of the
handset.
1. Insert the part (where the metal groove of the battery is located)
unto the groove at the bottom of the handset.
2. Then press the top of the battery until it snaps.
Charging the Battery
Your phone is powered by a charged Li-ion battery. Use only
authorized batteries and chargers. Ask your Pantech dealer for
further details. You may use the phone while the battery is charging.
In case a battery has been installed in the phone, open the cover to
the power adapter connector at the bottom of the phone and
connect the adapter to the connector. The adapter is supplied
together with the phone.
When the battery is fully charged, disconnect the adapter from the
connector.