Pantech G670 - Manual (Page 17)

16
INTERNAL LCD (MAIN LCD) INTERNAL LCD (MAIN LCD)
There are two LCD displays: main-LCD and sub-
LCD. One displays only icons to show the status of
the phone while the other shows messages,
telephone numbers, icons, or other information.
Main LCD Screen
An icon(s) is displayed when a certain function is activated, a
message has been received or idle mode.
The figure above displays a list of all the possible icons that may be
positioned at the top of the screen.
The function of each icon is described below.
Shows the strength of the RF signal. The
greater the number of bars, the stronger
the signal.
Indicates that a call is in progress.
Indicates that your ring type is in melody
mode.
Indicates that your ring type is in either
vibration mode or etiquette mode
(Vibration mode: yellow / Etiquette mode:
blue).
Indicates that your ring type begins with
either vibration-melody mode or
vibration followed by melody mode.
Indicates that there is an unread
message(s). When messages are stored in
the SIM to the maximum storage
capacity, this icon will change to
.
Indicates that an alarm has been set.
/
Signal strength
Call-active
Melody
Vibration
Vib then Ring/
Vib and Ring
SMS Message
Alarm