Panasonic SC-PM19 - Manual (Page 9)

Listening operations
9
RQT7364
The radio: manual tuning
1
Press [TUNER/BAND] to select:
FM AM
2
Press [PLAY MODE] to select “MANUAL”.
PRESET MANUAL
3
Press [4 4 4 4 4/REW/4] or [3 3 3 3 3/FF/¢] to select the
frequency of the required station.
“ST” is displayed when a stereo FM broadcast is being
received.
4
Adjust the volume.
Auto tuning
Press and hold [4
4 4 4 4/REW/4] or [3 3 3 3 3/FF/¢] for a moment. The
unit begins auto tuning when the frequency starts changing
rapidly and stopping when it finds a station.
• To cancel, press [4
4 4 4 4/REW/4] or [3 3 3 3 3/FF/¢] again.
• Excessive interference may interrupt auto tuning.
A To improve FM sound quality
Press and hold [PLAY MODE] to display “MONO”.
To cancel, press and hold [PLAY MODE] again.
MONO is also cancelled if the frequency is changed.
For normal listening, turn off “MONO”.
B FM allocation setting
By main unit only
This system allows you to receive FM broadcasts allocated in
0.1 MHz steps.
To change the step to 0.1 MHz
1 Press and hold [TUNER/BAND].
After a while the display flashes with the current minimum
frequency.
2 Continue to hold [TUNER/BAND] down.
When the minimum frequency changes, release the button.
To cancel, repeat the above steps.
Notes
• After changing the setting, previously preset frequency will
be cleared.
• Sound is momentarily interrupted if you load/unload a cassette
while listening to an AM broadcast.
4
1
3
2
1
TUNER/BAND
2
PLAY MODE
3
REW
FF
4
DOWN
VOLUME
UP
A
PLAY
MODE
B
TUNER/BAND
RQT7364-P_09-15_EN 30/12/03, 10:34 am 9