10 electronic program guide (epg) (for dtv only), Setting the timer manually – Pioneer Elite PureVision PRO 1110HD User Manual
Page 62
10
Electronic Program Guide (EPG) (for DTV Only)
62
En
Setting the timer manually
Using the menu, you can also preset digital TV pro-
grams by specifying their scheduled date and time.
1
Press HOME MENU.
2
Press / to select “Rec/View Timer”, and then
press ENTER.
• The schedule table appears.
Rec/View Timer
Timer Date
Start
Stop
Channel Target
Information
Total:0
Overlap
1
2
3
4
5
6
7
--/--
--/--
--/--
--/--
--/--
--/--
--/--
-- : --
-- : --
-- : --
-- : --
-- : --
-- : --
-- : --
-- : --
-- : --
-- : --
-- : --
-- : --
-- : --
-- : --
---.---
---.---
---.---
---.---
---.---
---.---
---.---
--------
--------
--------
--------
--------
--------
--------
1/4
3
Press / to select a list number, then press .
• You can select any desired list number.
4
Press / to specify a date, and then press .
5
Press / to specify the start hour, and then press
.
6
Press / to specify the start minute, and then
press .
7
Press / to specify the end hour, and then press
.
8
Press / to specify the end minute, and then
press .
9
Press / to specify a channel number, and then
press .
4
Press / to select “ANALOG”, and then press
ENTER.
EPG
*******
10:00 PM – 11:30 PM
*******
*******
Reservation Setting
Program View
Program Rec
******
Recording Type
ANALOG
i.LINK
• A dialog box for confirmation appears.
5
Press / to select “OK”, and then press ENTER.
• The program is preset and the schedule table is
restored.
• A red square icon appears for the preset
program.
• A black icon appears for overlapped
presetttings.
6
Press DTV GUIDE to exit the Program Guide.
• Switch on the recording equipment at least 30
seconds before the start of the preset program;
otherwise recording will not be executed.
• Finish presetting operations two minutes before the
start of the program; otherwise presettings may fail.
• For priorities about overlapped presettings, see
“Priority rules for overlapped presettings” on page 63.
• Confirm that the video output terminals on the Media
Receiver have been connected to the signal input
terminals on the VCR to be used for recording.
• If you switch off the system using the POWER
button, the program presetting will become
ineffective. Be careful not to switch off the power.
PDP-ELITE-Eng (57-64)
9/9/03, 11:46
62