beautypg.com

Getting started – Philips MCD139BDVD User Manual

Page 16

background image

16

English

Step 1: Using Remote Control

IMPORTANT!
– Before using the remote control,
remove the insulation plastic tab as
shown in the picture below.
– If the remote control does not
function correctly or the operating range
is reduced, replace the battery with a
new (CR2025) battery.

1

Push to open the battery tray.

2

Replace a new battery according to the
indicated polarity.

3

Push the battery tray back to close it.

Using the Remote Control to operate
the Player

1

Aim the Remote Control
directly at the remote sensor
(IR) on the front panel.

2

Select the source you wish to
control by pressing one of the
source select buttons on the
remote.

3

Then select the desired
function (for example,

ÉÅ, ¡ or ™).

CAUTION!

Remove the battery if it is exhausted

or if the Remote Control is not being
used for a long time.

Batteries contain chemical substances,

so they should be disposed of properly.

Getting Started

Step 2: Setting up the TV

IMPORTANT!
Make sure you have completed all the
necessary connections. (See
“Connecting TV”).

1

Switch the DVD system on and then select
DISC source. (See “Switching the system on/
off ”).

2

Turn on the TV and set to the correct video-in

channel. You should see the blue Philips DVD
background screen on the TV.

Usually these channels are between the

lowest and highest channels and may be called
FRONT, A/V IN, or VIDEO. See your TV manual
for more details.

Or, you may go to channel 1 on your TV, then

press the Channel up button repeatedly until
you see the Video In channel.

Or, the TV Remote Control may have a

button or switch that chooses different video
modes.

Or, set the TV to channel 3 or 4 if you are

using an RF modulator.

Selecting the color system that matches
your TV set

This DVD system is compatible with both NTSC
and PAL. For the playback of a DVD disc on this
DVD system, the color systems of the DVD, TV
set and DVD System should match.

M I C RO T H E AT R E M C D 1 3 9 B

SOURCE

ECO POWER

STANDBY-ON

pg001-038_MCD139B_05_Eng

2007.5.23, 16:16

16