Panasonic DMC-FX700 User Manual
Page 28
Preparation
- 28 -
•
Press the shutter button halfway or turn the camera off and on to cancel [SLEEP MODE].
•
[SLEEP MODE] is set to [5MIN.] in the Intelligent Auto Mode.
•
[SLEEP MODE] does not work in the following cases.
–
When using the AC adaptor
–
When connecting to a PC or a printer
–
When recording or playing back motion pictures
–
During a slide show
–
[AUTO DEMO]
•
The effect of the [LCD POWER SAVE] is lower in the Digital Zoom range compared to the
Optical Zoom range.
•
The effect of the [LCD POWER SAVE] will not affect the image being recorded.
•
Setting of [LCD MODE] has priority over the setting of [LCD POWER SAVE] regarding the
brightness of the LCD monitor.
•
The Auto Review function is activated regardless of its setting when using Auto Bracket
[SELF PORTRAIT]
and
[PHOTO FRAME]
and when recording still pictures
. Also, you cannot set the Auto Review function.
•
In Intelligent Auto Mode, the Auto Review function is fixed to [2SEC.].
•
[AUTO REVIEW] does not work when recording motion pictures.
q [ECONOMY]
You can conserve the battery life by setting these menus.
Also, the battery life is conserved by dimming the LCD monitor.
p [SLEEP MODE]:
The camera is automatically turned off if the camera has not been
used for the time selected on the setting.
[OFF]/[2MIN.]/[5MIN.]/[10MIN.]
[LCD POWER SAVE]:
Brightness of the LCD monitor is lowered. The battery life will be
conserved by lowering the image quality of the LCD monitor
further during the recording
¢
.
¢ Excluding the Digital Zoom range.
[OFF]/[ON]
o [AUTO REVIEW]
Set the length of time that the picture is displayed after taking it.
[OFF]
[1SEC.]
[2SEC.]
[HOLD]:
The pictures are displayed until one of the buttons is
pressed.
ECO