Panasonic DMC-FX700 - Manual (Page 38)

Basic
- 38 -
• The settings of the following items are fixed.
¢1 The settings which can be selected are different from when other [REC] Modes are used.
¢2 When [MOTION DEBLUR] is set to [ON], and maximum ISO sensitivity level becomes
[ISO6400].
¢3 Fix to [AUTO] during motion picture recording
¢4 It will be set to [Ø] when a face cannot be detected while recording motion pictures.
¢5 [i.ZOOM] will not work when the [MOTION DEBLUR] is set to [ON].
¢6 Fix to [MODE 1] during motion picture recording or when Burst is set.
• The following functions cannot be used.
– [ REC AREA]/[EXPOSURE]/[AUTO BRACKET]/Flash output adjustment /White Balance
fine adjustment/[MIN. SHTR SPEED]/[DIGITAL ZOOM]/[PICT. ADJ.]/[AUDIO REC.]/
[HISTOGRAM]
• The other items on the [SETUP] menu can be set in a mode such as the Program AE Mode.
What is set will be reflected in the Intelligent Auto Mode.
Item Settings
[GUIDE LINE] (P27) ([REC. INFO.]: [OFF])
[ECONOMY] ([SLEEP MODE]) (P28) [5MIN.]
[AUTO REVIEW] (P28) [2SEC.]
Flash (P56) /Œ
[QUALITY] (P110) A
[SENSITIVITY] (P111) (Intelligent ISO)
(The maximum ISO sensitivity:
ISO1600)
¢2,3
[ISO LIMIT SET] (P113) 1600
¢2
[WHITE BALANCE] (P113) [AWB]
[AF MODE] (P116) š (Set to [ ] when a face cannot be
detected
¢4
)
[PRE AF] (P119)
[METERING MODE] (P120) C
[I.EXPOSURE] (P120) [STANDARD]
[I.RESOLUTION] (P121) [i.ZOOM]
¢5
[STABILIZER] (P124) [AUTO]
¢6
[AF ASSIST LAMP] (P125) [ON]
[RED-EYE REMOVAL] (P125) [ON]
[CONTINUOUS AF] (P127) [ON]
[WIND CUT] (P127) [OFF]