Copy, P160) – Panasonic DMC-FX700 User Manual
Page 160
Advanced (Playback)
- 160 -
You can copy data of pictures you have taken from the built-in memory onto a card or from
a card into the built-in memory.
Select [COPY] on the [PLAYBACK] Mode menu.
Touch the copy destination.
Drag the screen horizontally to select an image, and then touch
[SET].
•
For how to select a picture, see
.
Touch [YES].
•
If you touch [CANCEL] while copying pictures, the
copying will stop halfway.
•
Do not turn the camera off at any point during the
copying process.
Touch [CANCEL] to return to the menu
screen.
•
Touch [EXIT] to close the menu.
•
If you copy from the built-in memory to a card, all the pictures are copied and then the
screen automatically returns to the playback screen.
Note
•
If you copy picture data from the built-in memory to a card which does not have sufficient free
space, the picture data will only be copied halfway. We recommend using a card which has
more free space than the built-in memory (about 40 MB).
•
If a picture exists with the same name (folder number/file number) as the picture to be copied in
the copy destination when [
] is selected, a new folder is created and the picture is copied.
If a picture exists with the same name (folder number/file number) as the picture to be copied in
the copy destination when [
] is selected, that picture is not copied.
•
It may take time to copy the picture data.
•
Only pictures recorded with a Panasonic digital camera (LUMIX) will be copied.
(Even if the pictures were recorded with a Panasonic digital camera, you may not be able to
copy them if they were edited with a PC.)
•
[PRINT SET], [PROTECT] or [FAVORITE] settings will not be copied. Perform the settings
again after copying is finished.
•
Motion picture recorded in [AVCHD] cannot be copied.
[COPY]
: All the picture data in the built-in
memory are copied onto the card at one
time.
> step
4
.
: One picture at a time is copied from the
card to the built-in memory.
> step
3
.