Pioneer PDR-W739 - Manual (Page 26)

26
7 Playback Functions
Programming a playlist
(CD-R)
You can program a playlist for a disc that's in the CD-R disc tray.
When you eject the disc, the playlist is lost.
1 Press CD-R then
7 to stop playback.
2 Press PROGRAM.
The PGM indicator lights and the display prompts you to
enter the first track in the playlist:
DISC
DISC
DISC
PGM
OVER
CD-R
1
2
3
X1
L
R –dB
8
40 18 6 0
3 Enter the track numbers in the order
you want them played.
Use the number buttons to select tracks:
• For track numbers 1 to 10, use the corresponding number
button.
• For track numbers over 10, press the >10 button, then enter
the track number. For example, to select track 20 press >10,
2, then 10/0.
• You can also use the
4 and ¢ buttons to select tracks,
pressing PROGRAM after each to enter it into the playlist.
After adding a track to the playlist, the display shows the
track number and the total playing time of the playlist:
DISC
DISC
DISC
PGM
OVER
TRK MIN SEC
CD-R
1
2
3
X1
L
R –dB
8
40 18 6 0
Note: the display will not show the total playing time of
playlists that exceed 100 minutes.
4 Press
3 (6 on the front panel) to
start playback.
Note: Clearing, checking and changing the playlist is the
same as for the 3-CD disc changer.
CHECK
3
- COMPACT DISC MULTI CHANGER
4 1 ¡ ¢
6 7
COMPACT DISC DIGITAL RECORDER
◊ÛB¿ˆ≥≤/ COMPACT DISC RECORDER / MULTI-CD CHANGER
CD-R CONTROL
COMPACT DISC RECORDER/
MULTI-CD CHANGER
PROGRAM CHECK CLEAR
9
1
5
2
6
3
7
4
8
10/0 >10
REMOTE CONTROL UNIT
&
CD-R
#
$ ›
О