Playback modes starting playback with a timer, 4 getting started, Playback modes – Pioneer PDR-W739 User Manual
Page 15: Starting playback with a timer, A single disc from the changer plays, then stops, If you're in, Mode, press the, Button for the disc you want to play. in, Mode) or the disc in the cd-r tray, Button is lit
15
4 Getting Started
Playback modes
The different play modes let you play either a single disc, or up to
four discs one after another for an uninterrupted playing time of up
to five hours.
1
Load a disc into disc tray 1 of the
changer.
2
Press OPEN/CLOSE 2
0.
Disc tray 1 closes and 2 opens. Load a disc into tray 2 of the
changer, then close the disc tray.
3
Load discs into tray 3 and the CD-R
as you like.
4
Press PLAY MODE to select the disc
playback mode.
Press repeatedly to switch between the three play modes:
•
ALL
– all discs loaded in the changer play one after the
other (default mode)
•
SINGLE
– a single disc from the changer plays, then stops
•
RELAY
– all discs in the changer, followed by the disc in the
CD-R tray, play one after the other
The display shows the current play mode:
DISC
DISC
SINGLE
ALL
RELAY
2
3
X1
L
R
–dB
8
40
18
5
Press DISC 1 (CD SELECT 1 on the
front panel) to start playback.
If you're in
SINGLE
mode, press the
DISC
(
CD
SELECT
)
button for the disc you want to play.
In
ALL
or
RELAY
modes, you can start playback from a disc
other than 1. However, playback will still stop after disc 3
(
ALL
mode) or the disc in the CD-R tray (
RELAY
mode).
• You can also start playback using the
6 button on the
3-CD changer side. Playback will start from whichever
CD
SELECT
button is lit.
COMPACT DISC RECORDER/
MULTI-CD CHANGER
DISC
1
PLAY
MODE
DISC
2
REMOTE CONTROL UNIT
DISC
3
CD-R
Î
CD SELECT
OPEN/CLOSE
1
3
2
3-CD CONTROL
1
3
2
OPEN/CLOSE
3
- COMPACT DISC MULTI CHANGER
PLAY MODE
0
0
0
6
COMPACT DISC DIGITAL RECORDER
0
◊ÛB¿ˆ≥≤/
COMPACT DISC RECORDER / MULTI-CD CHANGER
Starting playback with a timer
You can use this unit with a standard audio timer to start playback
at a set time. Simply load a disc (or discs) and set the timer. When
power is restored to this unit by the timer, playback will start
automatically in the default
ALL
mode.
• Before setting the timer, make sure that all discs loaded
into the changer have been read by the unit (wait for the
TOC
READ
message to disappear).