Philips X600 - Manual (Page 20)

Text and number entry 19
The basic steps of Stroke input are as follows:
The principle of stroke input is to dissect and
separate every stroke of a chinese character
according to sequence. When you wish to input the
character, press the keys corresponding to the
required strokes according to sequence to get the
1 Horizontal 2 Vertical 3 Left-falling
4 Right-falling
5 Over-
down
6 Special
7 8 9
* Mode 0 # Punctuation
1. Enter strokes 1 to 5
(excluding 7 and
9 ) R to clear.
2. Select from candidate list < or > / + or -
(scroll list)
3. Confirm selection ,
4. Select and enter association character,
or return to step 1 to enter new strokes.
5. Or press R to exit from association character
input mode, then press , to complete the
editing.