2 led indicators – Planet Technology FT-90X FT-906A20 User Manual
Page 8
-5-
2.1.2 LED Indicators
■
System
LED
Color
Function
PWR
Green
Lit: Power on.
■
10/100Base-TX Port
LED
Color
Function
Lit:
Indicate that the port is link up.
Blink:
Indicate that the converter is actively sending or receiving data over
that port.
LNK/ACT
Green
Off:
Indicate that the port is link down or no data flow.
Lit:
Indicate that the connection made through the corresponding port is
running in Full-Duplex mode.
FDX
Green
Off:
Indicate that the connection made through the corresponding port is
running in Half-Duplex mode.
Lit:
Indicate that the port is operating at 100Mbps.
100
Green
Off:
Indicate that the port is link down or 10Mbps.
■
100Base-FX SC/SFP Port
LED
Color
Function
Lit:
Indicate that the port is link up.
Blink:
Indicate that the converter is actively sending or receiving data over
that port.
LNK/ACT
Green
Off:
Indicate that the port is link down or no data flow.
Lit:
Indicate that the connection made through the corresponding port is
running in Full-Duplex mode.
FDX
Green
Off:
Indicate that the connection made through the corresponding port is
running in Half-Duplex mode.
#
Note
:
To press and release the RESET button. The FX-90x will back to the factory default mode. Be sure
that you backup the current configuration of FT-90X; else the entire configuration will be erased
when pressing the “RESET” button.
• Press and release the RESET button shortly, the device will be rebooted.
• Press the RESET button more than 10 seconds, the device will back to the factory default
mode; the entire configuration will be erased.