Polaris Sportsman 9921831 - Manual (Page 85)

82
MAINTENANCE
Cooling System
The engine coolant level is controlled, or maintained, by the recovery
system. The recovery system components are the recovery bottle, the
radiator filler neck, the radiator pressure cap and the connecting hose.
As coolant operating temperature increases, the expanding (heated)
excess coolant is forced out of the engine, past the pressure cap, and into
the recovery bottle. As engine coolant temperature decreases the con-
tracting (cooled) coolant is drawn back up from the bottle, past the pres-
sure cap, and into the radiator.
Some coolant level drop on new vehicles is normal as the system is
purging itself of trapped air. Check the coolant level and maintain as
recommended by adding coolant to the recovery bottle.
Polaris recommends the use of Polaris Premium 60/40 anti-freeze/cool-
ant or a 50/50 mixture of high quality aluminum compatible anti-freeze/
coolant and distilled water. Polaris Premium 60/40 is already premixed
and ready to use. Do not dilute with water. See page 122 for the part
numbers of Polaris products.
Always follow the manufacturer's mixing recommendations for the
freeze protection required in your area.
Recovery Bottle Coolant
The recovery bottle is located on
the left side of the vehicle.
1. Remove the left side panel.
See page 86.
2. Maintain the coolant level
between the minimum and
maximum marks on the bottle
(when the fluid is cool).
3. Add coolant as needed.