Philips AZ3856 - Manual (Page 16)

4 Load a tape.
5 Press to start recording.
To pause recording, press
•
. To resume, press this button again.
To stop recording, press
•
.
Record from USB
1 Press USB to select USB source.
2 Connect a USB device.
3 Stop USB playback.
4 Press to open the tape door.
5 Load a tape.
6 Start play the USB device and then press to start recording.
To pause/resume recording, press
•
.
To stop recording, press
•
.
Record from external audio devices
1 Press SOURCE repeatedly to select external audio source.
2 Connect an external audio device.
3 Stop playback.
4 Press to open the tape door.
5 Load a tape.
6 Start play the device and then press to start recording.
To pause/resume recording, press
•
.
To stop recording, press
•
.
Set the sleep timer
This unit can switch to standby automatically after a set period of time.
1 When the unit is turned on, press SLEEP repeatedly to select a set period of time (in minutes).
When sleep timer is activated, the display shows » .
To deactivate sleep timer
1 Press SLEEP repeatedly until [SLEEP OFF] (sleep off) is displayed.
When sleep timer is deactivated, » disappears on the display.
Listen through headphone
1 Plug a headphone into the socket on the unit.
Turn on/off the screen backlight
To turn on/off the screen backlight of main unit,
1 Press and hold SLEEP.