beautypg.com

3 get started, Install batteries, Install remote control batteries – Philips AZ3856 User Manual

Page 10

background image

13 TUNER

Select tuner source.

3 Get started

Caution

Use of controls or adjustments or performance of procedures other than herein may result in

hazardous radiation exposure or other unsafe operation.

Always follow the instructions in this chapter in sequence.

If you contact Philips, you will be asked for the model and serial number of your apparatus. The model

number and serial number are on the bottom of your apparatus. Write the numbers here:

Model No. __________________________

Serial No. ___________________________

Install batteries

Note

You can use both batteries and AC power as power supply of this apparatus.

Batteries are not supplied with the accessories.

1 Open the battery compartment.

2 Insert 6 batteries (type: R-20, UM-1 or D-cells) with correct polarity (+/-) as indicated.

3 Close the battery compartment. (See 3)

Install remote control batteries

Caution

Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire.

Risk of decreased battery life! Never mix different brands or types of batteries.

Risk of product damage! When the remote control is not used for long periods, remove the

batteries.

For first-time use:

1 Remove the protective tab to activate the remote control batteries.

To replace the remote control batteries:

1 Open the battery compartment.

2 Insert 1 CR2025 batterie with correct polarity (+/-) as indicated.

3 Close the battery compartment. (See 4)