Philips AZ3856 - Manual (Page 14)

6 Listen to the radio
Tune to a radio station
Note
For optimal reception, fully extend and adjust the position of the FM antenna.
•
1 Press TUNER to select FM or MW.
2 Press and hold / for more than 2 seconds.
[SEARCH] (search) is displayed. »
The radio tunes to a station with strong reception automatically. »
3 Repeat step 2 to tune to more stations.
To tune to a weak station, press
•
/ repeatedly until you find optimal reception.
Program radio stations automatically
Note
You can program a maximum of 20 FM radio stations and 20 MW radio stations.
•
1 In tuner mode, press and hold PROG for 2 seconds to activate automatic program mode.
[AUTO STORE] (auto store) is displayed. »
All available stations are programmed in the order of waveband reception strength. »
The first programmed radio station is broadcast automatically. »
Program radio stations manually
Note
You can program a maximum of 20 FM radio stations and 20 MW radio stations.
•
1 Tune to a radio station.
2 Press PROG to activate program mode.
[PROG] (program) blinks on the display. »
3 Press PRESET+/- ( ) to allocate a number (1 to 20) to this radio station, then press PROG to
confirm.
The preset number and the frequency of the preset station are displayed. »
4 Repeat the above steps to program other stations.
Note
To overwrite a programmed station, store another station in its place.
•
Select a preset radio station
1 In tuner mode, press PRESET+/- ( ) to select a preset number.