Pioneer Pioneer Multi Entertainment Player MEP-7000 - Manual (Page 69)

TROUBLESHOOTING
69
En
English
ERROR MESSAGE DISPLAY
When MEP-7000 is unable to operate properly, an error code is displayed on the display panel. Check the error code displayed against
the following table and take the recommended action to correct the error. If an error code other than any of the error codes listed in the
table below is displayed or if the same error code is displayed even after corrective action has been taken, contact your nearest Pioneer
Service Station or contact the store from which you purchased your player for assistance.
MEP-7000 UPDATES
Software for this unit may be updated to improve operation or functionality. For details consult the following support website:
http://www.prodjnet.com/support/
Error Code Error Type Media Description Possible cause and recommended action
E-6002 AUDIO DSP
DOWNLOAD
ERROR Programs cannot be written to
the audio DPS when the power
is turned on. Consult your dealer or the nearest Pioneer
Service Station.
E-7201 TOC READ
ERROR DVD/CD TOC data is not being read
from the disc. • If there are cracks in the disc, replace the
disc.
• If the disc is dirty, clean the disc.
• If the unit operates normally with other discs,
there is a problem with the disc.
E-8301 STOP ERROR DVD/CD Cannot stop disc properly. Consult your dealer or the nearest Pioneer
Service Station.
E-8302 PLAYBACK
ERROR DVD/CD Desired address cannot be
searched. • If there are cracks in the disc, replace the
disc.
• If the disc is dirty, clean the disc.
• If the unit operates normally with other discs,
there is a problem with the disc.
Address cannot be read.
Focus servo cannot be closed.
Pickup cannot be moved. Consult your dealer or the nearest Pioneer
Service Station.
E-8303 BUFFER WRITE
ERROR DVD/CD/USB Failed to write to music data
buffer. Consult your dealer or the nearest Pioneer
Service Station.
E-8304 DECODE ERROR DVD/CD/USB Although the compressed
music file (MP3/AAC) is in the
format supported by this unit,
a data error or decode error
occurred. Consult your dealer or the nearest Pioneer
Service Station.
E-8305 FORMAT ERROR DVD/CD/USB Although the extension of the
music file (MP3/AAC/WAV/
AIFF) is correct, the
description within the file is
not in the supported format. Exchange the disc or file to one that meets
format specifications.
E-8306 MUSIC FILE NONE USB Although tracks were entered
in libraries (database)/playlists
etc., at time of playback the
tracks had been deleted from
the USB storage device. Do not delete music files from USB storage
devices.
E-9101 LOADING
TIMEOUT DVD/CD A mechanical error (timeout)
occurred during the loading or
unloading of a disc. If a foreign object is in the disc loading slot,
remove the object.
MEP-7000_KU_EN.book 69 ページ ２００９年２月１２日 木曜日 午後３時１５分