Pioneer Pioneer Multi Entertainment Player MEP-7000 - Manual (Page 67)

TROUBLESHOOTING
67
En
English
A large amount of noise is
generated when playing back a
certain disc or discs. Playback
halts unexpectedly. • Disc is seriously warped or scratched. • Replace with new disc.
• Disc is unusually dusty or dirty. • Wipe away dust or dirt from disc.
Track won’t load during
playback. • LOAD LOCK is set to ON. • Use UTILITY screen to set LOAD LOCK to OFF.
Track searching fails to halt
with Auto Cue function turned
ON. • Track searching sometimes takes longer than
expected when the length of silent portions
between tracks is unusually long.
• If a search cannot be performed within 10
seconds, the track's start is set as the cue point.
• Hold the TIME/A.CUE button depressed for one
second or more to set the Auto Cue mode to
OFF.
The jog dial performs a
different function from that
desired. • The jog mode is incorrect. • Press the SCRATCH/JOG BREAK button to
select the desired function.
Back cueing fails to work when
the CUE button is pressed
during playback. • No cueing point has been defined. • Specify the desired cueing point. (P. 38)
Unable to produce loop
playback by pressing the OUT/
ADJUST button. • No cueing point (i.e., starting point) has been
defined.
• Specify the desired cueing point. (P. 38)
Auto cue and other setting are
not stored. • The power was turned off right after a setting
was made.
• Wait 10 seconds before turning off the power
after a change.
Can’t store cue/lop point data
for tracks on USB storage
device. • Insufficient space on USB storage device. • Delete unnecessary files or other make
sufficient space on USB storage device.
Recorded USB storage device
cue and loop points aren’t
displayed. • USB storage device was disconnected before
performing proper dismount procedure, or
power was turned off.
• Always perform proper dismount procedure
before disconnecting USB storage device or
turning off power.
Playlist tracks appear grayed
out. • The disc or USB storage device for the recorded
tracks is not loaded/connected.
• Load or connect the disc or USB storage device
for the recorded tracks.
• The recorded tracks have been deleted from the
USB storage device.
• The file names for the recorded tracks have been
changed, or the files moved.
• Once again record the changed file names or
changed locations in the playlist.
• USB storage device was disconnected before
performing proper dismount procedure, or
power was turned off.
• Always perform proper dismount procedure
before disconnecting USB storage device or
turning off power.
Can’t record tracks located on
USB storage device on playlist. • Insufficient space on USB storage device. • Delete unnecessary files or other make
sufficient space on USB storage device.
Keyboard input isn’t correct. • KEYBOARD LANGUAGE setting is incorrect. • Use UTILITY screen’s KEYBOARD LANGUAGE
setting to select the proper input language.
• You are using a keyboard for a language other
than the eleven supported by this unit.
• Use a keyboard for one of the supported
languages.
Character data for MP3, AAC
format tracks appears garbled. • LANGUAGE setting is incorrect • Go to the UTILITY screen and set LANGUAGE to
the language of your choice.
• The track information for the music file created
in the DJ software is in a language not
supported by this unit.
• Input the file information in a language
supported by this unit. This unit is able to display
European languages, Russian, simplified
Chinese and Japanese.
• The track information for this unit is in a
language not supported by the DJ software.
• For information on the languages supported by
your DJ software, check the instruction manual
for the software you are using.
Tracks contained in m3u files
won’t load. • m3u file is not recorded correctly. • Confirm correct recording format for m3u file.
Description of problem Possible cause of problem Recommended action
MEP-7000_KU_EN.book 67 ページ ２００９年２月１２日 木曜日 午後３時１５分