Troubleshooting, Error messages, Additional information – Pioneer DEH-2200UB User Manual
Page 18
Troubleshooting
Symptom
Cause
Action
The display
automatically
returns to the
ordinary dis-
play.
You did not per-
form any opera-
tion within about
30 seconds.
Perform operation
again.
The repeat play
range changes
unexpectedly.
Depending on
the repeat play
range, the se-
lected range may
change when se-
lecting another
folder or track, or
when fast for-
warding/rever-
sing.
Select the repeat
play range again.
A subfolder is
not played
back.
Subfolders can-
not be played
when
FOLDER
(folder repeat) is
selected.
Select another re-
peat play range.
NO XXXX ap-
pears when a
display is chan-
ged (e.g.,
NO
TITLE).
No text informa-
tion embedded
Switch the display
or play another
track/file.
The display is
illuminated
when the unit
is turned off.
Demo mode is
on.
Press
DISP/
/
SCRL to cancel
demo mode.
The unit is mal-
functioning.
There is inter-
ference.
You are using a
device, such as a
cell phone, that
transmits electro-
magnetic waves
near the unit.
Move electrical de-
vices that may be
causing the inter-
ference away from
the unit.
Error messages
When you contact your dealer or your nearest
Pioneer Service Center, be sure to note the
error message.
Built-in CD Player
Message
Cause
Action
ERROR-11, 12,
17, 30
Dirty disc
Clean disc.
Scratched disc
Replace disc.
ERROR-10, 11,
12, 15, 17, 30,
A0
Electrical or me-
chanical
Turn the ignition
switch OFF and
back ON, or switch
to a different
source, then back
to the CD player.
ERROR-15
The inserted disc
is blank
Replace disc.
ERROR-22, 23
Unsupported CD
format
Replace disc.
FRMT READ
There is some-
times a delay be-
tween the start of
playback and
when you start to
hear any sound
Wait until the mes-
sage disappears
and you hear
sound.
NO AUDIO
The inserted disc
does not contain
any playable files
Replace disc.
SKIPPED
The inserted disc
contains DRM
protected WMA
files
Replace disc.
PROTECT
All the files on
the inserted disc
are embedded
with DRM
Replace disc.
USB storage device
Message
Cause
Action
NO DEVICE
When plug and
play is off, no
USB storage de-
vice is con-
nected.
! Turn the plug
and play on.
! Connect a com-
patible USB sto-
rage device.
FRMT READ
There is some-
times a delay be-
tween the start of
playback and
when you start to
hear any sound
Wait until the mes-
sage disappears
and you hear
sound.
Additional Information
En
18
Appendix