beautypg.com

Switching off the demo, Child lock, Changing the clock format – Pioneer S-DV313 User Manual

Page 73: Setting the tv format, Additional information, English italiano français, Nederlands, Español deutsch, Additional information 13, Chapter 13

background image

Additional information

13

73

En

English

Italiano

Français

Nederlands

Español

Deutsch

Chapter 13

Additional information

Switching off the demo

• Default setting:

Demo On

This system has an automatic demo feature
that starts when the system is plugged in for
the first time.

1

Switch the system into standby.

2

Press SYSTEM SETUP.

3

Use the

/

(cursor left/right)

buttons to select ‘Demo Mode?’, then
press ENTER.

4

Use the

/

(cursor up/down)

buttons to select ‘Demo Off?’ then press
ENTER to confirm.

• After setting the clock, the demo mode

switches off automatically. However, if
you unplug the system from the wall
outlet, the demo mode will revert to

Demo

On

(and the clock will be reset).

Child Lock

• Default setting:

Lock Off

This system has a child lock feature that
makes the front panel buttons and controls
inoperative. This is useful when you’ve set the
wake-up timer and don’t want the system
switched on before it activates.

1

Switch the system into standby.

2

Press SYSTEM SETUP.

3

Use the

/

(cursor left/right)

buttons to select ‘Child Lock?’, then press
ENTER.

4

Use the

/

(cursor up/down)

buttons to select ‘Lock On?’ or ‘Lock Off?’.

5

Press ENTER to confirm.

Changing the clock format

• Default setting:

12-Hour

You can choose to display the clock in either
12 or 24 hour formats.

1

Switch the system into standby.

2

Press SYSTEM SETUP.

3

Use the

/

(cursor left/right)

buttons to select ‘12/24 Hour?’, then press
ENTER.

4

Use the

/

(cursor up/down)

buttons to select either ‘12-Hour?’ or ‘24-
Hour?’.

5

Press ENTER to confirm.

Setting the TV format

• Default setting:

AUTO

The default setting of this system is

AUTO

,

and unless you notice that the picture is
distorted when playing some discs, you
should leave it set to

AUTO

. If you experience

picture distortion with some discs, set the TV
system to match your country or region’s
system. Doing this, however, may restrict the
kinds of disc you can watch. The table below
shows what kinds of disc are compatible with
each setting (

AUTO

,

PAL

and

NTSC

).

HTS.book 73 ページ 2003年2月25日 火曜日 午後1時45分

This manual is related to the following products: