Panasonic KX-PW301DL - Manual (Page 17)

Operating the built-in answering device
2
When receiving a call, a greeting message will be
played and the unit will record a voice message.
● To record your own greeting message, see page 16.
F 1 F 3
light on/flash
light on
F 4
Activating the answering device Operating the answering device
from a remote location
1
Turn the (Auto answer) light on by pressing .
Listening to recorded messages
When new messages are recorded, the (Auto
answer) light will flash.
Press to listen to recorded messages.
Listening to all of the recorded
messages
Press (Replay/Record).
Erasing a specific message
1
Press (Erase) while listening to the message
you want to erase.
F 1
2
Press .
Erasing all of the recorded messages
1
Press (Record).
F 3
2
Press (Start), then press .
Erasing your own greeting message
2
Press (Start) and press .
● The pre-recorded Japanese greeting message will
be played when you receive a call.
Preparation: Programming the remote operation ID
1. Press (Function).
2. Press (Search button) repeatedly until the
following is displayed.
3. Press (Start).
4. Enter any 4-digit number (remote operation ID) except
or #.
5. Press (Register).
6. Press (Stop).
F 4
Operation: Listening to a recorded message from a
remote location
Turn the (Auto answer) light on before you go out.
Remote operations are available only from a touch tone
telephone.
1. Call your unit.
2. Enter the remote operation ID during the greeting
message.
3. Press or wait 4 seconds.
● Only the new recorded messages will be played
back.
● To listen to all the recorded messages, press
after the new messages have been played back.
4
2
1
Press (Record) and press (Search button)
repeatedly until the following is displayed.
F 3
17